TACTICAL

Saat ini terpal PVC Coated untuk tenda sarnafil berkembang secara drastis. Menyadari sepenuhnya akan kebutuhan yang dapat digunakan untuk tenda sarnafil, penutup truk, penutup kendaraan, peralatan pribadi & terpal penutup umum dalam konteks tampilan militer atau tentara.

Dirancang untuk memenuhi spesifikasi aplikasi luar ruangan, karakteristik tahan air yang tinggi, dan kinerja tahan api menjadikannya material luar ruang yang ideal untuk semua aplikasi cuaca.


COMPOSITE MEMBRANE

1. Base Fabrics

2. Primary Coating

3. Top Coating

4. Surface Treatment (Lacquering)

TECHNICAL SPECIFICATION

Technical Properties 750AIO

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Total Weight : 750 gr/m2

Width : 150 cm

Thickness : 0.95 mm

Tensile Strength : 200 daN/5cm

Tear Strength : 25 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Available upon request

Adhesion : N/A

Finishing : Glossy/Matte

Quality Management System : ISO 9001:2008

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength


Technical Properties 550ACB

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Total Weight : 550 gr/m2

Width : 250 cm

Thickness : 0.45 mm

Tensile Strength : 120 daN/5cm

Tear Strength : 25 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Available upon request

Adhesion : 9 daN/5cm

Finishing : Glossy/Matte

Quality Management System : ISO 9001:2008

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength


Technical Properties 751

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Total Weight : 750 gr/m2

Width : 250 cm

Thickness : 0.58 mm

Tensile Strength : 200 daN/5cm

Tear Strength : 30 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Available upon request

Adhesion : 10 daN/5cm

Finishing : Glossy/Matte

Quality Management System : ISO 9001:2008

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength


Technical Properties 650ACM

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Total Weight : 650 gr/m2

Width : 250 cm

Thickness : 0.5 mm

Tensile Strength : 280 daN/5cm

Tear Strength : 28 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Available upon request

Adhesion : 9.5 daN/5cm

Finishing : Glossy/Matte

Quality Management System : ISO 9001:2008

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength


BASE FABRIC

A woven base fabric of high tenacity polyester yarns is the base material to provide tear strength, tensile strength and dimensional stability on finished product.

BASE FABRIC

The primary PVC coating impregnate the base cloth to enhance the impressive dimensional stability, high tensile strength and high elongation rupture.

BASE FABRIC

Applying the lacquer on the surface generates the maximum protection quality against atmospheric chemical, microbial and fungal attacks, weather and environment friendly resistance to Ultra Violet Thermal, Rain, Abrasion and Flame Retardant.

MAIN BENEFITS

  • Printable and Easily Absorb the Ink

  • Longetivity

  • Easy Maintenance

  • Waterproof and Superb Protection Against Ultra Violet

THE MAJOR ADVANTAGES

  • Limitless architectural design possibility

  • Low construction cost & efficiency

  • Available for large size roofings & fitting

  • Lightweight and flexible yet strong and durable

  • Easy handling and fast installation

  • Mobile, temporary and permanent basis use

  • Weather and environmental friendly